Tips for DIY Tree Removal

Tree removal can be very dangerous and even life-threatening. It is never recommended to remove a tree on your own unless this is a small one that you're confident it is possible to handle safely. Otherwise, tree removal ought to be left in the hands of professionally-trained and equipped tree service contractors. Assuming you have a tree on your property that's fairly small, but needs to be removed, you can possible do it yourself with the proper tools, knowledge, and planning.

Tree Removal Preparation

Proper preparation for small tree removal involves gathering all of your needed supplies, and, a comprehensive inspection of the tree. Look to see if the tree leans one way or the other, and plan a getaway route in case it generally does not fall the way you expect it to fall. Also, examine whether or not there are any obstacles in virtually any direction of the tree, including vehicles, structures, and other trees. Should you be sure there is enough safe clearance for the tree to fall, then you can certainly move ahead to gathering your equipment and tools. This includes:

Safety Gear (Utility gloves, goggles, hard hat, steel toe boots, etc.)
Chainsaw
Ax or Hacksaw
Ladder
Rope
Wedges
First Aid Kit
TO ELIMINATE a Tree

Once you have all your equipment and supplies, you can obtain started removing the tree. First, use  https://northlondontreesurgeon.co.uk/  to knock on the bark several times, and in several different places, to learn how solid or hollow the tree is. Finding a less dense area to cut will be easier. Next, plan which side of the tree you need to make your cut. Turn to see where the tree naturally leans; it is best to cut a tree in the direction in which it really wants to naturally fall. Be sure the area where the tree drops is level so the tree does not roll or bounce after it falls.

Make a horizontal cut at hip-height, and about 1/3rd in to the tree. Do this on the side of the tree where you need it to fall. If you wish the tree to fall to the right, you must cause you to cut on a single side so it falls inward, towards the cut. The tree will fall perpendicular to your horizontal cut. Your next cut should develop a wedge into the tree. So make the second cut at an angle from the initial cut. It should appear to be a lemon wedge.

Your third cut is named a back cut, and is ought to be made on the opposite side of your wedge cut. This cut will make the tree fall over on the side of your wedge cut. Ensure it is about 1.5 inches above the wedge cut, and as thick as possible. You may also use a wedge to avoid the tree from settling onto the chainsaw. Add more wedges as necessary before tree begins to fall. Then run! But usually do not turn your back on the tree as it falls.